“I was looking for a local supplier of Resin for my 3D printer and found Charlie at Monocure 3D. I was pleasantly surprised to discover that they make an Australian developed and manufactured Dental Model Resin that is very price competitive. The support they provided was amazing, they got my printer up and running on their resin in no time!”
Dr. Isidoro Ferlito
Orchard Dental
IMPORTANT NOTICE: Dental Model Resin production has been discontinued and replaced by the improved dental formula, PORCELENE™.
Diagnostic models | Implant models | Orthodontic models | Clear aligner models | Crown & Bridge Prototypes
High accuracy
No shrinking or warping formulation. Fast layer curing means jobs done quicker.
Easy on the eyes
High opaqueness, with gypsum-like texture and a matte surface finish is less stressful.
Hard surface
80+ Shore D after post-curing, the non-flex formula is perfect for accurate clear aligner models.
Multi-compatible formulas
Choose the formula that is best suited to work with your DLP/MSLA 3D printer. Find your printer settings here.
About Dental Resins
Monocure 3D Rapid Model Dental resin was developed for the high precision and accuracy required for dental professionals. It was formulated to have high dimensional stability, a gypsum-like texture, a unique matte finish and an opaque colour for all 3D printed dental model processing.
It is designed to work with all MSLA and DLP printers. Our Dental resin allows for highly accurate printing in the range of 100 to 10-micron layers. The finished surface is very smooth and hard, which helps create precise angles, optimising the print quality, and reducing the rate of print failures.
NB. Monocure 3D Dental model resin is not approved for intraoral use.
DENTAL PRINTING TIPS
Ensure the resin is mixed well by shaking the bottle before every print.
Always dial-in new resins using our calibration models.
For best results, and a safer alternative, clean models with our ResinAway® solution.
Remember to post-cure after cleaning to remove the tackiness and complete the cross-linking process.
DENTAL MODEL resin is very versatile and can be printed between 5 micron and 100-micron layer heights. To achieve the best results, 3D models should always be designed solid, if hollowing is required, ensure drain holes are included to remove any trapped resin.
Always print large flat areas on an angle to help with print deformation due to the adhesion to the FEP film. To assist with unsupported areas, ensure you use well-positioned, solid supports. We recommend you add 1-2 seconds’ wait after print’ setting to allow the material to cool after curing before starting to lift the build plate. (Not all slicers have this setting, check with your software provider). Use a calibration model, to dial in your printer with our resin. Check our printer setting page to see if we have your printer listed to give you a good starting point.
FINISHING — WHAT'S THE BEST PRACTICE?
- For best results after printing, use ResinAway® for removing uncured resin from the part. Place part in a pre-wash bath filled with ResinAway® and use a soft brush to remove excess resin. Follow by placing the component into an ultrasonic cleaner with ResinAway® for 3-5mins to help remove the resin trapped in the finer detail.
- Ensure parts are dry by using compressed air or patting gently with a lint-free cloth before post-curing – Warning: leaving excess IPA or ResinAway® on parts might result in surface cracking.
- We recommend using a 405nm LED Ultraviolet light to post-cure the model. It is recommended to post-cure for a few minutes, then remove the excess ResinAway by washing with fresh water. Then place it back in the curing chamber for at least 5 mins to improve the tensile strength of the resin.
PHYSICAL PROPERTIES RAPID
Product Code(s)
3DDR-3817W, 3DDR-3818BG, 3DDR-3819T, 3DDR-3588GY & 3DDR-3830C
Colour(s)
White, Beige, Tan, Grey & Clear
Viscosity
400cps @ 25°C (BrookfieldRVT)
Odour
Negligible Characteristics
Shelf Life
36 months
Active Solids
100%
UV Cure
225nm to 420nm
Cure Speed
1.5-7 seconds per layer with UV 405um LED
Storage
Dark, cool & dry place away from direct sunlight
Wash Up
RESINAWAY® or IPA (Isopropyl Alcohol)
Compatible Printers
Monochrome & Colour LCD MSLA type 3D printers (Anycubic Photon/Mono, Phrozen Shuffle/Sonic, Creality LD, Elegoo, Epax, Peopoly Phenom, Prusa SL1, Uniz Slash & Plus, Wanhao, WOW SparkMaker Range, FLSUN S, XAYAV Model V, Kelant Range…)
PHYSICAL PROPERTIES STANDARD
Product Code(s)
3DDS-3817W, 3DDS-3818BG, 3DDS-3819T, 3DDS-3588GY & 3DDS-3830C
Colour(s)
White, Beige, Tan, Grey & Clear
Viscosity
400cps @ 25°C (BrookfieldRVT)
Odour
Negligible Characteristics
Shelf Life
36 months
Active Solids
100%
UV Cure
225nm to 420nm
Cure Speed
3-7 seconds per layer with UV 405um
Storage
Dark, cool & dry place away from direct sunlight
Wash Up
RESINAWAY® or IPA (Isopropyl Alcohol)
Compatible Printers
Any high powered, bottom-up, LED projector, laser based 3D Printer or SLA 3D Printers (MoonRay, SprinRay, Peopoly Moai, Asiga UV-Max, Phrozen Make, B9 Creator, Flashforge Hunter, XYZ Nobel, Kudo Titan…)