“Our first achievement was the Rapid Model Resin. It’s a robust, easy to use, epoxy-based system which is perfectly suited to prototyping and a vast range of 3D printed models.”
Charlie Anderson
Founding Director
Rapid Prototypes | Miniatures | Prototypes | Marketing | Architecture | Costume | Temp Models
Incredible Detail
A unique, epoxy-based resin that outputs the highest quality details 3d printing resin without being brittle.
Easy to Use
Give the bottle a shake, and the Rapid Model resin is ready to pour and print. No heating required.
Ultra Fast
This resin has the ability to print fast on all DLP and MSLA 3D printers. Typically 2.5-second normal layers on most Monochrome 3D printers.
Huge Colour Range
Need some colour? Don’t print in just black and white. Available is a variety of deep solid colours to really make your models stand out.
About Model Resins
Our Rapid Model Resin range was originally developed around MSLA printers that used lower powered LED arrays to cure the resin. The unique, epoxy-based system creates models that process a hard surface finish without the brittleness you would expect. This resin is easy to use; give the bottle a quick shake then, pour and print! The typical normal layer durations for a colour-based MSLA printer are 5-6 seconds per layer or 3 seconds in a printer with a monochrome LCD. Rapid Resin only requires a short post-curing required to remove tackiness after cleaning. Please check our printer settings (link) page for all the information to help you dial in your printer with our resin.
MODEL PRINTING TIPS
Ensure the resin is mixed well by shaking the bottle before every use.
Always Dial-in your Printer using our Calibration Models.
For best results, clean Models with our ResinAway® solution.
To reduce the yellowing, try to Post-Cure using 405nm UV only.
Rapid MODEL resin is very versatile and can be printed between 5-micron and 100-micron layer heights. To achieve the best results 3D models should always be designed solid, if hollowing is required, ensure drain holes are included to remove any trapped resin.
Always print large flat areas on an angle to help with print deformation due to the adhesion to the FEP film. To assist with unsupported areas, ensure you use well-positioned, solid supports. This resin will print faster than other resins on the market, please adjust your settings accordingly. Use a calibration model like our Matrix, to dial in your printer with our resin. Check our printer setting page to see if we have your printer listed to give you a good starting point.
FINISHING — WHAT'S THE BEST PRACTICE?
- For best results after printing, use ResinAway® for removing uncured resin from the part. Place part in a pre-wash bath filled with ResinAway® and use a soft brush to remove excess resin. Follow by placing the component into an ultrasonic cleaner with ResinAway® for 3-5mins to help remove the resin trapped in the finer detail.
- Ensure parts are dry by using compressed air or patting gently with a lint-free cloth before post-curing – Warning: leaving excess IPA or ResinAway® on parts might result in surface cracking.
- We recommend using a 405nm LED Ultraviolet light to post-cure the model. It is recommended to post-cure for a few minutes, then remove the excess ResinAway® by washing with fresh water. Then place it back in the curing chamber for at least 30 mins to improve the tensile strength of the resin.
- When exposing a part to external elements, apply paint to the surface to improve longevity. Alternatively, the components can be machined, sanded and polished to create a tough scratch resistant surface.
PHYSICAL PROPERTIES
Product Code(s)
3DR-3582C, 3DR-3588GY, 3DR-3587BK, 3DR-3583W, 3DR-3585B, 3DR-3585R, 3DR-3585G, 3DR-3585GM
Colour(s)
Clear, Grey (5% trans), Black (5% trans), White, Blue (10% trans), Red (5% trans), Green (10% trans), Gun Metal (5% trans)
Viscosity
500 – 600cps @ 25°C (Brookfield RVT)
Odour
Negligible Characteristics
Shelf Life
36 months
Active Solids
100%
UV Cure
225nm to 420nm
Cure Speed
Fast with UV LED
Storage
Dark Cool, dry place out of direct sunlight
Wash Up
RESINAWAY® or IPA (Isopropyl Alcohol)
Showing all 9 results
