3D Rapid Model Resin

(6 customer reviews)
$44.00$291.50

Our RAPID Model Resin range is designed for all MSLA-type 3D printers such as the Anycubic, Phrozen, Elegoo, Creality, Epax, Prusa, Peopoly, etc. Rapid Resin only requires a short post-curing required to remove tackiness after cleaning. Please check our printer settings page for all the information to help you dial in your printer with our resin.

Clear

EAN SKU M/3DR Categories , Tags , ,


Share
Description

Our Rapid Model Resin range was originally developed around MSLA printers that used lower-powered LED arrays to cure the resin. The unique, epoxy-based system creates models that process a hard surface finish without the brittleness you would expect. This resin is easy to use; give the bottle a quick shake then pour and print! The typical normal layer durations for a colour-based MSLA printer are 5-6 seconds per layer or 1.5-3 seconds in a printer with a monochrome LCD. Rapid Resin only requires a short post-curing required to remove tackiness after cleaning. Please check our printer settings page for all the information to help you dial in your printer with our resin.

Additional information
Weight 1 kg
Resin Size

0.5L, 1L, 5L

Resin Colour

Black, Blue, Clear, Grey, Gunmetal Grey, White

All Monocure 3D resins have a very wide range of reactivity, UV wavelengths of 225nm to wavelengths of 420nm. By incorporating a blend of photo-initiators, monomers & sensitizers, almost any UV light source can be used to initiate the polymerisation process of our resins.

Our resins have been tested with a ‘Shore D Hardness Durometer’ and have a rating of 75. (For example, a hard hat has a rating of 80)

The Viscosity of our resin is 500 – 600cps @ 25°C (Brookfield RVT).

All our resins have a low odour, have zero VOC emissions and display very low shrinkage properties <0.5%>

Please store Monocure 3D resin in a dark, cool place out of direct sunlight.

Product reviews
  • TimothySpringfield@rhyta.com
  • hayleyjames.hj92@gmail.com
  • allkindsacrazy@gmail.com
  • luke.devtron@gmail.com
  • djay.3dprinting@gmail.com
  • printmyscans@gmail.com
Add a review

This site uses Akismet to reduce spam. Learn how your comment data is processed.