3D RAPID RESIN - GREY (1 Ltr)

$82.50

Grey is the perfect & highly recommended colour for photographing your 3D prints. The solid grey appearance allows you to 3D print models or parts with a detailed smooth finish that will be grey in colour when cured.

15 in stock

Weight 1.3 kg
Dimensions 8 × 8 × 24.5 cm

All Monocure 3D resins have a very wide range of reactivity, UV wavelengths of 225nm to wavelengths of 420nm. By incorporating a blend of photo-initiators, monomers & sensitizers, almost any UV light source can be used to initiate the polymerisation process of our resins.

Our resins have been tested with a ‘Shore D Hardness Durometer’ and have a rating of 80. (For example, a hard hat has a rating of 80)

The Viscosity of our resin is 500 – 600cps @ 25°C (Brookfield RVT).

All our resins have a low odour, have zero VOC emissions and display very low shrinkage properties <0.5%>

Please store Monocure 3D resin in a dark, cool place out of direct sunlight.

Download Data Sheet

Download the product MSDS

1 review for 3D RAPID RESIN – GREY (1 Ltr)

  1. Darryn Stanmore (verified owner)

    The Rapid grey is my go-to resin, I print mostly tabletop wargaming stuff, with the addition of a little (10%) of Flex-100 my prints can handle being knocked off the table most of the time. The Rapid resins are easy to clean up and prime for further painting, have a much lower smell then a lot of other resin out there.

    If you ever have an issue with a product get in touch with the team, they are quick to reply and highly informed! A combination big all the above makes Monocure3D a company I will continue to support for many years to come.

    Thanks guys, you rock!

Add a review

Your email address will not be published. Required fields are marked *