Sale!

3D Rapid Model Resin Red – 0.5 L

$22.00

or 4 fortnightly payments of $5.50 with Afterpay More info

Our RAPID Model Resin range is designed for low powered LED DLP type 3D printers such as the Anycubic Photon, Phrozen Shuffle, Sparkmaker Pro, FSL1, Wanhao Duplicator 7 & 8, etc. Where the LED power output is less than 100w. If your printer is over 100 watts then our Standard resin might be better suited? You can check your printer compatibility with our Resin Compatibility form.



Share
Additional information
Weight 0.7 kg

All Monocure 3D resins have a very wide range of reactivity, UV wavelengths of 225nm to wavelengths of 420nm. By incorporating a blend of photo-initiators, monomers & sensitizers, almost any UV light source can be used to initiate the polymerisation process of our resins.

Our resins have been tested with a ‘Shore D Hardness Durometer’ and have a rating of 75. (For example, a hard hat has a rating of 80)

The Viscosity of our resin is 500 – 600cps @ 25°C (Brookfield RVT).

All our resins have a low odour, have zero VOC emissions and display very low shrinkage properties <0.5%>

Please store Monocure 3D resin in a dark, cool place out of direct sunlight.

Reviews

There are no reviews yet.

Be the first to review “3D Rapid Model Resin Red – 0.5 L”