SprintRay Pro 95 S Dental 3D Printer

SprintRay Pro 95 S Dental 3D Printer

The SprintRay Pro 95 S is a professional dental 3D printer designed to improve productivity, accuracy and ease of use in an in-practice digital workflow. Its intuitive interface makes the system straightforward to learn, teach and integrate into day-to-day dental production.

Key features include:

  • Advanced all-glass optics for uniform light distribution and accurate, detailed prints.
  • Heated build platform to support adhesion and reliable dental appliance production.
  • Smart resin tank with automatic resin and tank tracking.
  • Onboard intelligence with integrated sensors and real-time workflow assistance.

Contact Monocure3D for resin compatibility guidance

The SprintRay Pro 95 S is designed to simplify and accelerate in-office dental production. Its all-glass DLP optical system, heated build platform, smart resin-tank tracking and onboard intelligence support accurate, repeatable workflows. When printing Monocure3D DLP resins, Monocure3D recommends selecting the Guide 3 setting in the printer software as a starting point, based on internal testing.

  • Professional DLP printer designed for in-practice dental production
  • All-glass optical system for uniform, accurate printing
  • Heated build platform and smart resin-tank tracking
  • Intelligent onboard sensors and guided workflow
  • Use the Guide 3 software setting with Monocure3D DLP resins

Dial in your resin for the best print results

Use our calibration models to fine-tune your printer’s exposure settings for your chosen resin.

View Calibration Models

Monocure3D Resin Guidance for SprintRay Pro 95 S

Use the following printer-software selection as the recommended starting point when printing Monocure3D DLP resins on the SprintRay Pro 95 S.

Recommended printer-software selection
Select this material setting
GUIDE 3

When using Monocure3D DLP resins with the SprintRay Pro 95 S, select “Guide 3” in the printer software.

Before printing

  1. Load your prepared model in the SprintRay printer software.
  2. Select Guide 3 as the material or print setting.
  3. Confirm the printer, resin and job preparation before starting the print.
  4. Validate the result for your specific resin batch, appliance and workflow before production use.
Why this setting? Based on Monocure3D’s internal testing, the Guide 3 selection has produced reliable print performance across our DLP resin range. It should be treated as a recommended starting point; results can vary with resin batch, printer condition, geometry, room temperature and workflow.

Trademark and compatibility notice: SprintRay® is a registered trademark of SprintRay Inc. Monocure3D is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by SprintRay. References to SprintRay printers and products are for identification purposes only. Any references to compatibility are based on Monocure3D’s internal testing, customer feedback and real-world customer use. Such references do not indicate that Monocure3D products have been tested, approved, certified or endorsed by SprintRay.

Related Products