Formlabs Form 4B
Monocure3D Resin Profiles for Formlabs Form 4B
The Formlabs Form 4B can print compatible third-party 405 nm photopolymer resins when Open Material Mode has been activated on the printer.
Contact us for your Monocure3D resin settings
Monocure3D has developed starting profiles for selected resins used with the Form 4B in Open Material Mode. Settings can vary according to the resin, application, colour, layer height and required print result.
Contact our technical team and tell us which Monocure3D resin you intend to use. We will provide the appropriate starting settings and calibration advice.
Important: These profiles are starting settings, not guaranteed final values. Always confirm exposure using a calibration model before production printing. Follow the applicable product instructions and safety procedures for biocompatible or regulated applications.
Formlabs® and Form 4B® are trademarks of Formlabs Inc. Monocure3D is an independent resin manufacturer and is not affiliated with, endorsed by, or sponsored by Formlabs. Compatibility references are based on Monocure3D testing and practical use and do not represent Formlabs certification or approval.