Monocure3D Resin Profiles for Sprintray 95 Printers

Monocure3D Resin Guidance for SprintRay Pro 95 S

Use the following printer-software selection as the recommended starting point when printing Monocure3D DLP resins on the SprintRay Pro 95 S.

Recommended printer-software selection
Select this material setting
GUIDE 3

When using Monocure3D DLP resins with the SprintRay Pro 95 S, select “Guide 3” in the printer software.

Before printing

  1. Load your prepared model in the SprintRay printer software.
  2. Select Guide 3 as the material or print setting.
  3. Confirm the printer, resin and job preparation before starting the print.
  4. Validate the result for your specific resin batch, appliance and workflow before production use.
Why this setting? Based on Monocure3D’s internal testing, the Guide 3 selection has produced reliable print performance across our DLP resin range. It should be treated as a recommended starting point; results can vary with resin batch, printer condition, geometry, room temperature and workflow.

Trademark and compatibility notice: SprintRay® is a registered trademark of SprintRay Inc. Monocure3D is an independent manufacturer and is not affiliated with, endorsed by, or sponsored by SprintRay. References to SprintRay printers and products are for identification purposes only. Any references to compatibility are based on Monocure3D’s internal testing, customer feedback and real-world customer use. Such references do not indicate that Monocure3D products have been tested, approved, certified or endorsed by SprintRay.