Incredafill® – Ultimate Starter Kit (350g)

$119.90

The Ultimate Starter Kit includes everything you need to get started. IncredaFILL™ is a ready-mixed urethane polymer filler that uses the advanced technology of UV light to cure instantly! In just 5 seconds, with the portable LED UV torch, it’s ready to sand and paint. IncredaFILL™ is a 100% solid material in both paste and cured form. It’s non-shrinking and non-cracking and can be easily sanded, painted, or varnished.

Learn More

In stock

UV Safety Glasses

$12.10

In stock

3 x Single Applicator

$0.99

Description

The Ultimate Starter Kit includes everything you need to get started. IncredaFILL™ is a ready-mixed, urethane polymer filler that uses the advanced technology of UV light to cure instantly! In just 5 seconds, with the portable LED UV torch, it’s ready to sand and paint. IncredaFILL™ is a 100% solid material in both paste and cured form. It’s non-shrinking and non-cracking and can be easily sanded, painted, or varnished.

Learn More

Kit includes:

1 x 350grams IncredaFILL™ filler paste
1 x UV LED 395nm LED Torch
1 x 18650 Rechargeable Battery
1 x USB Battery Smart Recharger
1 x Pair Wrap UV400 Safety Glasses
3 x Plastic Filler Applicators

Don’t waste valuable time waiting for your filler to dry…Buy IncredaFILL™  today and get the job done FAST.

 

Customer Reviews

Based on 12 reviews
100%
(12)
0%
(0)
0%
(0)
0%
(0)
0%
(0)
M
Marco Venturini
Incredafill™ – Ultimate Starter Kit

Brilliant product a must have for 3d creators

D
Djay

A real crush on this product !
just amazing, it gives you so many possibilities, repair, adjust, seal, both on resin and on pla.
This is a must-have product!
Enjoy

Djay

L
Laura Cole

Finally had a chance to use my incredifill and wow! I have used this product to remove layer lines and fill gaps in a large FDM print and the time, effort and pain saved is priceless. So easy to use, not rush trying to fill gaps as it doesn't air dry and so easy to sand to the perfect finish.

W
Wayne Cogan

I was sceptical that the value would be there compared to using 2-part epoxy putty (milliput, greenstuff) for fixing up small print failures or miniatures in parts, but after using this on a number of models I can say the value is definitely there. This tub is going to go a long way - although not a direct replacement for putty, rather with the consistency of a paste it... fills a different purpose.

Can recommend for miniature printing. Also works well to reinforce joins.

N
Nick Eichler

After wasting many hours using car filler and waiting for it to dry, Sanding andthen have to add more and back to waiting for it to dry,

This is a game changer in speeding everything up being UV cured instead of air cured, while also being much smoother with alot less effort, Takes days of work smoothing a mould for vaccum forming into half a days work.

While maybe not as cheap as a normal car filler can you put a price on time you would save?

Additional information
Weight 0.1 kg

Filling | Smoothing | Repairing | Fairing | Skim Coating | Filleting | Strengthening

Don’t waste valuable time waiting for filler to dry…Use IncredaFILL™ and get the job done FAST.

PRODUCT DESCRIPTION

This ready-mixed, urethane-polymer filler uses the advanced technology of UV (Ultra-Violet) light to cure in an instant! This highly versatile material will adhere to most surfaces, including plastics, glass & metal. Apply a thin layer of IncredaFILL™ to any surface, then use the portable UV torch and watch it set rock hard! This 100% solid material was specially formulated using the latest microparticle technology. Once cured, UV & water-resistant, non-shrinking & non-cracking filler can be sanded then finished with any paint or varnish.

Ready-mixed | UV Polymer Paste | Instant Curing | Non- Shrinking | Chemical Resistant | Interior or Exterior | Spot Curing | GlowSPOT™ | Reduce waste | Resistant to Moisture | Easy Sanding (wet or dry) | Multi-Surface

QUICK GUIDE

1. Apply
Using a flexible applicator or a gloved finger and apply the filler paste in thin layers.

2. Cure
To set hard, cure for 10 seconds using 395-405nm Ultra-Violet (UV) light source.

3. Sand
Sand smooth by stepping from course to fine grades of wet or dry sandpaper.

4. Finish
For best results, use quality spray paints or an airbrush. Finish with a clear coat for ultimate protection and durability.

Video Instructions

ULTIMATE STARTER KIT

1. IncredaFILL™ & Applicators
This ready-mixed, urethane polymer filler uses the advanced technology of UV light to cure in an instant! It is packed in a PET UV safe black screw-top container, it also has a protective internal seal as double protection to prevent accidental opening in daylight. Ensure to store in a dark, cool, dry place away from direct sunlight. Wipe surfaces and clean equipment with RESINAWAY™ or IPA.

2. UV LED 395nm Torch
This ultimate LED UV 395nm torch from UltraFire has a black aluminium alloy body, optical zooming lens for precision focusing & spot curing, powerful LEDs (3.7V-8.4V) powered by a 18650 rechargeable battery (included). An impressive waterproof rating of IPX4. The compact size (12.3cm X 2.8cm), small enough to carry in a pocket.

3. Battery + Smart Recharger
The powerful 18650 battery and the accompanying USB smart recharger gives the UltraFire® Torch the power it needs to cure IncredaFILL™ fast! This long-lasting rechargeable battery delivers an impressive 3.7 Volts. Recharge time is ultra-fast, and the recharger has smart sensor technology so the battery won’t suffer from overcharging.

4. UV Safety Glasses
It is important to always protect your eyes from UV light when curing IncredaFILL™. These high clarity yellow lens safety glasses will allow you to easily see without any damage to your eyes. Remember to always wear gloves when handling this product., if skin contact does occur, simply wipe off and wash will soapy water. Please download the MSDS for more information.

5. What’s in the Box?
The IncredaFILL™ Ultimate Starter kit includes everything you need. The individual containers can be purchased separately when more material is needed.

1 x 350 grams IncredaFILL™ filler paste
1 x 18650 Rechargeable Battery
1 x Pair Wrap UV400 Safety Glasses
1 x UV LED 395nm Torch
1 x USB Battery Smart Recharger
3 x Plastic Filler Applicators

BEST PRACTICES

Ensure surfaces are clean, dry and free of loose material.
Using a flexible spatula, press the filler paste firmly into the surface.
Apply thin layers and build up to ensure the product is cured properly.
Cure IncredaFILL™ until hard using a 395-405nm LED UV light source.

APPLICATION INSTRUCTIONS

  • Be sure to wear proper safety gear when working with IncredaFILL™ and sanding the cured material. Always try to avoid breathing in the fumes, filler particles or dust.
  • Prepare the surface with some light sanding (if needed). Using a slightly damp rag, wipe the area to remove dust and other contaminates.
  • Always work indoors and away from any UV light. Unscrew the lid to reveal the Safety seal (this is to prevent the product from accidental UV exposure. Remove the seal to expose the product.
  • Using a flexible metal or plastic applicator, scoop out a small amount of IncredaFILL™ from the Tub. We recommend testing a small batch before using it on your actual project.
  • Apply the paste in thin layers to the surface on which you are working. The smoother you can get it at this stage, the easier it will be when sanding.
  • ProTip: To save time with sanding, be sure not to overfill.
  • Once the treated area is smooth and ready, use a 395-405nm UV light source to start the curing process. To do this, expose the material to UV light for 15-20 seconds. Hold the light over the uncured material for larger areas and use a zig-zag pattern to expose a section at a time. Alternatively, you could place the object in direct sunlight to cure large areas quickly.
  • ProTip: For deeper holes, to ensure the product is adequately cured, apply and cure in thin layers to build it up.
  • Once IncredaFILL™ has been appropriately cured, wipe the surface with Isopropyl Alcohol (IPA). Wiping removes any excess material that might remain on the surface.
  • Starting with coarse grade sandpaper (60-100 Grit), remove the excess filler. To ensure a smooth finish, step up the sandpaper grades, e.g. 80, 120, 240, 400, 800.
  • ProTip –  Unlike some fillers, IncredaFILL™ can be wet sanded. Using wet sandpaper helps keep the dust particles down and keeps it cleaner and less likely to gum up.
  • After reaching the desired smoothness, prepare the surface by wiping it with a “tack rag” to remove the dust left from sanding. Apply a good quality Paint Primer, and apply to the surface.
  • After the primer has dried, the topcoat can be applied (unless further sanding is required)
  • ProTip – To achieve the smoothest results, repeat the priming and wet sanding process.

SAFETY GUIDELINES

When using this product, ALWAYS wear recommended PPE (Personal Protective Equipment). This includes gloves, UV safety glasses & certified dust masks when sanding.
After handling IncredaFILL™, ensure to thoroughly wash hands and any exposed skin before going outside into the sun. If any material is on your skin and it is exposed to UV light, burns may occur.
If skin contact does occur, wipe off with IPA (Isopropyl Alcohol) and wash thoroughly soapy water. For full safety procedures, please download the MSDS for more information.
Cure the product in a well-ventilated area, ensure to use a certified mask if sensitive to the odour. Always protect your eyes from UV light by never looking directly at it.

WARNINGS

KEEP OUT OF REACH OF CHILDREN & ANIMALS

DO NOT USE IN AQUARIUMS

AVOID CONTACT WITH FOOD OR DRINK

USE IN WELL VENTILATED AREAS

ALWAYS WEAR GLOVES & UV PROTECTIVE GLASSES

WEAR A DUST MASK WHEN SANDING

AVOID CONTACT WITH SKIN – WASH OFF IMMEDIATELY

THIS PRODUCT WILL HEAT (50-70C) WHEN CURING

COAT WITH UV RESISTANT PAINT OR VARNISH IF CURED PRODUCT WILL BE EXPOSED TO SUNLIGHT

REFER TO SDS (SAFETY DATA SHEET) FOR DETAILED SAFETY INSTRUCTIONS

Download SDS

PHYSICAL PROPERTIES

Product Code(s)

3DI-3903

Colour(s)

Semi-Transparent Grey

Viscosity

70,000cps

Odour

Negligible Characteristics

Shelf Life

36 months

Active Solids

100%

UV Cure

395nm to 405nm

Cure Speed

15 Seconds with UV LED Torch

Storage

Store in a dark, cool, dry place away from direct sunlight.

Wash Up

RESINAWAY® & IPA

MECHANICAL PROPERTIES

Product Code

3DI-3903

Cross-Sectional Area (mm2)
25.34
Max Force (kN)
1.54
Tensile Strength (MPa)
51
Percentage Elongation at Break

2.5

Young’s Modulus (GPa)

0.7

Shore Hardness (Scale D)

94.5

Temp. Resistance (C)

-20 – 60

Max Load Applied (N)

160

Flexural Stress (MPa)

143

Max Flexural Strain (mm/mm)

0.05

Method Code

ASTM D790-10