Incredafill™ – Ultimate Starter Kit
Description
The Ultimate Starter Kit includes everything you need to get started. IncredaFILL™ is a ready-mixed, urethane polymer filler that uses the advanced technology of UV light to cure in an instant! Just 15 seconds with the portable LED UV torch and it’s ready to sand and paint. IncredaFILL™ is a 100% solid material in both paste and cured form, it’s non-shrinking, non-cracking and can be easily sanded then painted with any type of paint or varnish.
Kit includes:
1 x 350grams IncredaFILL™ filler paste
1 x UV LED 395nm LED Torch
1 x 18650 Rechargeable Battery
1 x USB Battery Smart Recharger
1 x Pair Wrap UV400 Safety Glasses
3 x Plastic Filler Applicators
Don’t waste valuable time waiting for your filler to dry…Buy IncredaFILL™ today and get the job done FAST.
Additional information
| Weight | 0.1 kg |
|---|
Only got this the other day as I saw it on the splash page so still messing with it
Most people were looking at using UV resin to smooth FDM prints so seeing this was a paste I thought I just had to try it over using liquid resin, I did not regret it!
Been printing the same deadpool mask from the product images and it is so far working out better than expected
I also used the incredafill to bind the separate pieces together and so much easier than anything else, especially because it cures quickly and is thick enough to hold in place while curing
Definatley impressed! Will definatley be ordering refils
This is the product of the year!!! I have been using in all sorts of ways, from filling gaps and imperfections, to strengthening thin walls and of course, overall smoothing. Best idea ever! I had tried a lot of other products including those used in the car painting industry but the ease of use and fast results of IncredaFILL cannot be beaten. I have already been recommending it to my friends! Thanks for the great product!
As a modelmaker that would normally use car bog, this product is a massive time saver. It’s easy, quick and a lot less mess that other fillers.
I’ve been using it mostly to fill the support marks that are left on resin prints and I couldn’t be more happy with how pleasant it is to use.
I’m very sure I will find other uses for it too as it seems so versatile.
Well worth every dollar and it’ll now be a staple in my kit
Incredafill is absolutely amazing. I have smoothed over FDM prints with layer heights of 0.3 and you wouldn’t know. No layer lines to be seen after light sanding. Perfect results with resin prints as well.
Incredafill in extremely versatile. I had a chip on my kitchen bench … thought I would get creative … Incredafill is the only filler product that I have found to work effectively – and most importantly – quickly.
There seems to be nothing that it can’t do. I can’t recommend this product highly enough. Simple to use and post curing you can sand and paint no problems.
Awesome product.
As an official member of the Mandalorian Mercs Costume Club, part of the directive with our kits is there is to be no layer lines showing.
Not only will incredaFILL allow this, but it will make it a hell of a lot easier to do so. As no more working with bondo with a limited working time and long clean-up and sanding time to make it smooth.
It will also come with me to Con’s and will help not only me & other Mando’s but members of the 501st & Rebel Legion if we need a quick kit repair.
I haven’t used incredaFILL for surface smoothing, instead I have been using it in place of the modelling putty I normally use for gap filling when model making. Up until now I had been using a two part epoxy putty that is mixed as needed, it would set in around an hour and I’d always have 90% of what I mixed left over as I only needed tiny amounts at any one time.
The incredaFill is easier to work with than the putty, building up and curing the layers until the gaps are filled and the surface smooth. It’s much quicker, minutes rather than an hour, and leaves a better finish that rarely needs any further work. If you’re model making, this is a must.
Got this as more of experiment.
Overall very easy to use. Apply the paste and hit with the torch.
I have been using it for repairs and cover up of joins on my resin models. I already have plans to use it in other modelling projects.
This is stuff I never knew I needed until I got it.
The starter torch is very effective and works wonderfully on the regular resin as a great bonus.
This has become a part of my regular kit
After wasting many hours using car filler and waiting for it to dry, Sanding andthen have to add more and back to waiting for it to dry,
This is a game changer in speeding everything up being UV cured instead of air cured, while also being much smoother with alot less effort, Takes days of work smoothing a mould for vaccum forming into half a days work.
While maybe not as cheap as a normal car filler can you put a price on time you would save?
I was sceptical that the value would be there compared to using 2-part epoxy putty (milliput, greenstuff) for fixing up small print failures or miniatures in parts, but after using this on a number of models I can say the value is definitely there. This tub is going to go a long way – although not a direct replacement for putty, rather with the consistency of a paste it… fills a different purpose.
Can recommend for miniature printing. Also works well to reinforce joins.
Finally had a chance to use my incredifill and wow! I have used this product to remove layer lines and fill gaps in a large FDM print and the time, effort and pain saved is priceless. So easy to use, not rush trying to fill gaps as it doesn’t air dry and so easy to sand to the perfect finish.
A real crush on this product !
just amazing, it gives you so many possibilities, repair, adjust, seal, both on resin and on pla.
This is a must-have product!
Enjoy
Djay