M/DTB-4234P1-500B
Create customised, natural-looking gingival shades with the Monocure3D Denture Base Toner System.
These concentrated dental resin toners are designed specifically for use with Monocure3D Clear Denture Base Resin, allowing dental technicians to control colour intensity and translucency for patient-specific results.
Choose from four graduated pink shades: P1 Light Pink, P2 Natural Pink, P3 Mid Pink and P4 Dark Pink.
A 10% addition by weight is the recommended starting ratio, so one 500g bottle is ideally sized to tint approximately 5kg of clear Denture Base Resin at the standard concentration. Use less toner for a lighter, more translucent result, or more toner for a stronger and more solid colour.
The shades can also be blended together. For example, P2 Natural Pink can be made slightly darker by adding a small amount of P3 Mid Pink or P4 Dark Pink.
Important: Denture Base Toners are concentrated colouring products intended to be mixed with Monocure3D Denture Base Resin. They are not designed to be printed as a standalone resin.
Create Natural-Looking Gingival Shades
Create customised gingival colours with the Monocure3D Denture Base Toner System, developed specifically for use with Monocure3D Clear Denture Base Resin.
These concentrated dental resin toners allow technicians to control colour intensity and translucency for more natural, patient-specific results.
Four TrueShade Colours
A 10% addition by weight is the recommended starting ratio. One 500g bottle is ideally sized to tint approximately 5kg of Clear Denture Base Resin at the standard concentration.
Use less toner for a lighter, more translucent result, or increase the concentration for a stronger colour. Shades can also be blended together to create intermediate gingival tones.
Important: Denture Base Toners are concentrated colourants designed to be mixed with Monocure3D Denture Base Resin and are not intended to be printed as a standalone resin.
At Monocure3D, quality is at the centre of everything we manufacture.
Every product is developed and produced in Australia using carefully
selected raw materials and undergoes strict quality control testing
before leaving our facility. Every production
batch is tested against the previous approved batch to ensure colour,
performance and consistency remain as close as possible. Our Quality
Control results are available online, providing complete transparency
and confidence in the products you purchase. Our
experienced technical support team is always available to help you
achieve the best possible results. Whether you need assistance selecting
the right material, optimising your printer settings or troubleshooting
a print, we’re here to help.
If you experience a problem with one of our products, please contact us with the following information:
Providing this information allows our team to identify the cause much
more quickly and provide accurate recommendations. If we determine that
a product is faulty or not performing as intended, we will work with
you to resolve the issue and, where
appropriate, provide a replacement or refund in accordance with
Australian Consumer Law.
When you choose Monocure3D, you’re choosing Australian-made products
backed by experienced chemists, rigorous quality control and genuine
technical support.