UV Safety Glasses
P/LOGO-GLASSES-UV400
UV safety glasses provide a practical layer of eye protection when working around compatible UV curing lights, resin printers and post-curing equipment. Their lightweight design makes them convenient for routine workshop tasks such as inspecting prints, spot curing repairs and handling UV-curable materials.
Wear the glasses whenever there is a risk of direct or reflected UV exposure, and avoid looking directly into an operating UV LED or curing source. Eye protection should be used alongside suitable gloves, ventilation and the safety procedures supplied with your resin, printer and curing equipment.
Before each use, inspect the lenses and frame for cracks, heavy scratches or other damage that could affect fit or visibility. Clean the lenses with a soft cloth and an appropriate cleaner, then store the glasses away from direct sunlight, heat and abrasive tools.
These glasses are a useful workshop accessory, but protection requirements vary by wavelength and application. Confirm suitability for your specific UV source and follow workplace safety requirements where applicable.
At Monocure3D, quality is at the centre of everything we manufacture.
Every product is developed and produced in Australia using carefully
selected raw materials and undergoes strict quality control testing
before leaving our facility. Every production
batch is tested against the previous approved batch to ensure colour,
performance and consistency remain as close as possible. Our Quality
Control results are available online, providing complete transparency
and confidence in the products you purchase. Our
experienced technical support team is always available to help you
achieve the best possible results. Whether you need assistance selecting
the right material, optimising your printer settings or troubleshooting
a print, we’re here to help.
If you experience a problem with one of our products, please contact us with the following information:
- The product name and batch number (printed on every bottle)
- Your printer make and model
- Photos of the printed part and the issue
- Screenshots of your print settings
- A brief description of the problem
Providing this information allows our team to identify the cause much
more quickly and provide accurate recommendations. If we determine that
a product is faulty or not performing as intended, we will work with
you to resolve the issue and, where
appropriate, provide a replacement or refund in accordance with
Australian Consumer Law.
When you choose Monocure3D, you’re choosing Australian-made products
backed by experienced chemists, rigorous quality control and genuine
technical support.