GINGIVA GUM-LIKE DENTAL RESIN
Our Flexible Dental Resin, GINGIVA helps improve implant workflows and produces natural-looking, flexible gum-like parts for dental implant models. The elastic material is highly tear-resistant, flexible, and easy to adjust via grinding if needed.
Showing the single result
GINGIVA Flexible Dental Model Resin
$159.50 – $638.00Gingiva Mask | Gum models | Implant models | Orthodontic models | Soft-tissue models
THE GINGIVA™ RESIN ADVANTAGE
Easy-to-Print Formula
This Flexible resin was developed to 3D print with ease. It can be used in conjunction with our STUDY™ or PRECISE™ model resins.
Excellent Tear Resistance
A Semi-Flexible material with the right amount of hardness allows easy trimming without tearing. Has excellent mechanical properties after hardening.
Comparable to Conventional
It features Shore A hardness of 62 and is comparable to conventional materials, so technicians can adopt digital processes.
Multi-compatible formulas
It will work with all 3D resin printers. Choose the formula that is best suited to work with your DLP/MSLA 3D printer. Find your printer settings here.
About Gingiva gum-like Dental Resin
Our GINGIVA flexible resin was developed specifically for printing Gingiva sections for 3d printed dental models. The material is available in two formulas for MSLA and DLP 3D printers. It can print within a wide range of UV, between 255 and 425nm.
It was formulated to have high dimensional stability, and a unique solid gum-pink colour. It processes the right combination of flexibility and hardness. It can be used with hard dental models made from our PRECISE™ Dental Resin or STUDY™ Dental Resin, Grey, Slate & Tooth colour.
Gingiva Mask opens the possibility of creating the soft part for highly precise models, bridges and implant superstructures. With its soft and flexible properties, it is perfect for the production of gum parts and soft tissue, which supports dental implant models and C&B projects.
GINGIVA Dental Model resin helps improve implant workflows and produces 3D models with flexible, natural-looking gingiva masks. It features a shore A hardness of 62 and is comparable to conventional materials, so technicians can adopt digital processes yet still enjoy the same characteristics of traditional materials.
NB. Monocure 3D Gingiva Flexible Dental Resin is not approved for intraoral use.
Which GINGIVA™ formula Suits your 3D Printer?
GINGIVA™ Dental Model Resin is available in two formulas. Since DLP printers output more power than MSLA, we have a version to cover both system types.
Choose the DLP formula if your printer uses a projector module (DLP) to expose the layers. These include brands and models such as the MoonRay, SprintRay, Peopoly Moai, Asiga UV-Max & Pro 4K, Phrozen Make, B9 Creator, Flashforge Hunter, XYZ Nobel, and Kudo Titan.
If your 3D printer uses an LCD screen and a LED array (MSLA) to expose the layers, you must use our regular MSLA formula. These include Anycubic, Phrozen, Creality, Elegoo, Epax, Peopoly, Prusa, Uniz, Wanhao, WOW SparkMaker & Kelant.
If your printer is not listed here, please Contact Us.
GINGIVA PRINTING TIPS
Ensure the resin is mixed well by shaking the bottle before every print.
Always dial-in new resins using our calibration models.
Remember to post-cure after cleaning to remove the tackiness and complete the cross-linking process.
For best results, and a safer alternative, clean models with our ResinAway® solution.
A TRUELY FLEXIBLE RESIN
GINGIVA flexible resin is versatile and can be printed between 10 and 100-micron layer heights. To achieve the best results, 3D models should always be designed solid.
Always print large flat areas on an angle to help with print deformation due to the adhesion to the FEP film. To assist with unsupported areas, ensure you use well-positioned, solid supports. Make sure the support tips are large with a good contact depth. Printing on a Brim or Skirt can make printing software materials easier to remove from the build plate.
We recommend you add a 1-2 seconds wait after print setting to allow the material to cool after curing before starting to lift the build plate. (Not all slicers have this setting, check with your software provider). Use a calibration model to dial in your printer with our resin. Check our printer setting page to see if we have your printer listed to give you a good starting point.
3 STEPS TO A PERFECT FINISH
For best results after printing, use ResinAway® to remove uncured resin from the part. It cleans faster, better and lasts longer than IPA. It is non-flammable, doesn’t evaporate and has a pleasant scent. Follow the steps below to achieve the best finish for your 3D Printed dental models.
- Place the model into an ultrasonic cleaner with ResinAway® for 3-5mins to help remove the resin trapped in the finer detail.
- Ensure parts are dry by using compressed air or patting gently with a lint-free cloth before post-curing – Warning: leaving excess IPA or ResinAway® on parts might result in surface cracking.
- PRECISE™ resin requires post-curing to reach its optimal mechanical properties. We recommend using a 405nm LED Ultraviolet light to post-cure the model. It is recommended to post-cure for a few minutes, then remove the excess ResinAway® by washing with fresh water. Then place it back in the curing chamber for at least 30 mins to improve the tensile strength of the resin. This is important if you intend to use the model for Vacuum Forming.
GINGIVA - PHYSICAL PROPERTIES (MSLA)
SKUs
M/DGR-3987PK
Colour(s)
Pink
Viscosity
400cps @ 25°C (BrookfieldRVT)
Odour
Negligible Characteristics
Shelf Life
36 months
Active Solids
100%
UV Cure
225nm to 420nm
Cure Speed
1.5-7 seconds per layer with UV 405um LED
Storage
Dark, cool & dry place
Wash Up
RESINAWAY® or IPA (Isopropyl Alcohol)
Compatible MSLA Printers
- Anycubic
- Phrozen
- Creality
- Elegoo
- Epax
- Peopoly
- Prusa
- Uniz
- Wanhao
- WOW SparkMaker
- Kelant
- Not Listed – Contact Us
GINGIVA™ - PHYSICAL PROPERTIES (DLP)
Product Code(s)
DGS-3988PK
Colour(s)
Pink
Viscosity
400cps @ 25°C (BrookfieldRVT)
Odour
Negligible Characteristics
Shelf Life
36 months
Active Solids
100%
UV Cure
225nm to 420nm
Cure Speed
3-7 seconds per layer with UV 405um
Storage
Dark, cool & dry place.
Wash Up
RESINAWAY® or IPA (Isopropyl Alcohol)
Compatible Printers
- Asiga
- SprintRay
- Peopoly
- MoonRay
- Phrozen Make
- B9 Creator
- Flashforge Hunter
- XYZ Nobel
- Kudo Titan
- Not Listed – Contact Us
Are you using Dental 3D Printer Resin for work?
Are you interested in becoming a Monocure 3D Reseller? Please fill in our online Application Form.
Do you work in Education, Government, or have your own Business? Fill in the application Form to see if you qualify for a Wholesale account.
If you like keeping up with the latest 3D printing news, then please subscribe to our Youtube Channel Monocure 3D ProTips and join the fun?