“I call this stuff liquid insurance. There is nothing worse after an 8-hour print to discover the model has fallen off the build plate. Thanks to PLATEBOND™ that is a thing of the past! “
Duncan Louca
Shadow Miniatures
APPLICATION & TIPS
Apply a few drops onto the build plate using the dripper provided.
Using a scraper or gloved finger, smear the PLATEBOND™ liquid adhesive across the entire print area.
Allow the printer to cure the PLATEBOND™ with the first few base layers. (It does not need to be cured before printing).
If the model is difficult to remove after printing, hot water or a hairdryer can be used to help release the model from the build plate.
Monocure 3D PLATEBOND™ is a UV cured build plate adhesion promoter. It is designed to help 3D printed resin parts adhere to the build plate. This can be used in conjunction with Monocure 3D resin or with other photopolymer resin systems. This product is designed to work with 3D printing applications where UV light is used to cure resin layer by layer.
HOW TO HANDLE PLATEBOND
Storage
Store PLATEBOND™ in a dry, cool place, away from direct sunlight.
Warning
This is a UV sensitive product. Please keep the lid on when not in use.
PPE
Always wear recommended safety PPE when handling this product.
Info
Refer to MSDS below for more information.
PHYSICAL PROPERTIES
Product Code(s)
3DPB-3793
Colour(s)
Transparent
Viscosity
1000cps
Odour
Negligible Characteristics
Shelf Life
36 months
Active Solids
100%
UV Cure
225nm to 420nm
Cure Speed
Very fast with UV Lasers & LEDs
Storage
Dark Cool, dry place out of direct sunlight.
Wash Up
RESINAWAY® or IPA (Isopropyl Alcohol)
HOW TO USE PLATEBOND
Showing the single result
