Showing the single result
Platebond 30 ml
$27.50APPLICATION & TIPS
Ensure the build plate is clean and dry. Apply a few drops onto your 3D printer's build plate using the dripper provided.
Using a metal scraper or gloved finger, smear the PLATEBOND™ liquid UV adhesive across the entire print area.
Allow the 3D printer to cure the PLATEBOND™ with the first few base layers. (It does not need to be cured before printing).
If the model is difficult to remove after printing, run hot water over the back of the build plate to help release the 3D printed part(s).
HOW TO HANDLE PLATEBOND
Storage
Store PLATEBOND™ in a dry, cool place, away from direct sunlight.
Warning
This is a UV sensitive product. Please keep the lid on when not in use.
PPE
Always wear recommended safety PPE when handling this product.
Info
Refer to Physical Properties & SDS (Saftey Data Sheet) for more information.
PHYSICAL PROPERTIES
Product Code(s)
3DPB-3793
Colour(s)
Transparent
Viscosity
1000cps
Odour
Negligible Characteristics
Shelf Life
36 months
Active Solids
100%
UV Cure
225nm to 420nm
Cure Speed
Very fast with UV Lasers & LEDs
Storage
Dark Cool, dry place out of direct sunlight.
Wash Up
RESINAWAY® or IPA (Isopropyl Alcohol)
HOW TO USE PLATEBOND
- Apply a few drops onto your 3D printer’s build plate using the dripper provided.
- Smear the PLATEBOND™ liquid UV adhesive across the entire print area.
- Start your print as normal to allow the 3D printer to activate the PLATEBOND™ with the first few resin base layers.
- If the model is difficult to remove after printing, run hot water over the back of the build plate to help release the 3D printed part(s).