Compared to Anycubic Wash & Cure 2.0, the Anycubic Wash& Cure 3 has an impressive 100% increase in cleaning basket capacity, now at 3 liters. The total volume of the cleaning bucket has been expanded to 4 liters. This makes it perfectly tailored for LCD (light-curing) 3D printers with a size of 7.3 inches or less.
The curing size has increased by 15%, up to 160*180 millimeters, to accommodate larger and more models for single post-processing session.
Localized Strengthening, Uniform Curing
The "Innovative Flexicure Gooseneck Light Design" increases the energy value by 30,000uW/cm² within a 1-3 cm irradiation range, significantly strengthening the curing effect on subtle areas such as the top of models and the hem of garments. *Data sourced from Anycubic Laboratory
By adopting a brand-new arrangement of light beads and lens light source, Anycubic Wash & Cure 3.0's curing uniformity has been enhanced by 20%* compared to its predecessor 2.0. This results in a more thorough and comprehensive curing of the entire model.
Dual-layer Design, IPA Saving
The double-layered PP material cleaning basket is designed to support simultaneous cleaning with the platform. It features two adjustable heights at 100mm and 165mm, providing flexibility to accommodate printing platforms ranging from 5.9 inches to 7.3 inches. This design maximizes the efficiency of IPA usage.
Cleaning basket made of PP material (rust-resistant) VS the previous generation's metal material (prone to rust)
Simple Operation, Quiet and Efficient
Cleaning and curing dual modes, easily selected with one click; Enhanced Gooseneck light curing mode can be easily toggled on and off with one click. Infinite rotary knob control, adjustable from 1 to 30 minutes at will.
Through a more sealed structural design and software optimization, the noise interference generated during cleaning and curing is reduced, creating a quieter and more comfortable working environment.
The 15.1L Anycubic Wash & Cure 3 Max has a maximum wash capacity of 305*165*300mm; a 98.55% capacity increase over the the Anycubic Wash & Cure 3 Plus. Compatible with LCD 3D printers with a build volume of 13.6-ich or lower.
Fully Automated All-in-1 Cleaning Station
No more getting your hands dirty during washing and curing; just one click is all it takes for a fully automated process from start to finish.
Customizable Wash & Cure Process
*Automatic mode:Spray+Immersion+Cur ing with customizable washing duration.
The dual cleaning mode (spray +immersion) significantly reduces IPA consumption. Cleaning o large 25 cm/10-inch model requires only about 4L of IPA (cleaning solution), achieving nearly 50% savings compared to the 8.5 liters used in traditional immersion wash & cure.
Power Density up to 25000μW/cm2
Featuring a 360° rotating curing platform with a maximum power density of 25,000 μW/cm? at an irradiation distance of 18 cm
Full-process Intelligent Monitoring
The device cannot start when the cover is open. If the start/pause button is pressed, a continuous alert will sound for 2 seconds.
Aesthetic & All-in-one
Transparency and simplicity. Flip-open lid and minimalistic control panel.
