Fep Film 200 Microns (5 Sheet Pack)
$38.23
FEP FILM, 195mm x 135mm, 200 Micron (5 Sheet Pack), dual layer protection.
In stock
Description
SMALL SIZE – 200 Micron
L195mm x W135mm x D0.2mm
5 Sheet Pack
Additional information
| Weight | 0.25 kg |
|---|
This genuine Fluorinated Ethylene Propylene (FEP) film is designed as the release layer for UV 3D printer resin vats.
SHIPPING
Free Shipping with any Resin, Pigment or RESINAWAY purchase.
GENERAL DIRECTIONS
1. Prepare a non-scratch surface, such as a lint-free cloth to prevent the film from being damaged.
2. Remove a single FEP Sheet from the pack.
3. Carefully peel away protective layers from both sides of the film.
4. Install the FEP film into printer VAT as per the manufactures instructions.
5. Make sure the film is tight when finished (light tapping with a finger should make a drum-like sound).
6. FEP film can be wiped clean to remove any fingerprints using a lint-free cloth & Isopropyl Alcohol (IPA).
2. Remove a single FEP Sheet from the pack.
3. Carefully peel away protective layers from both sides of the film.
4. Install the FEP film into printer VAT as per the manufactures instructions.
5. Make sure the film is tight when finished (light tapping with a finger should make a drum-like sound).
6. FEP film can be wiped clean to remove any fingerprints using a lint-free cloth & Isopropyl Alcohol (IPA).
