PRECISE™ Dental Model Resin
PRECISE™ HD dental resin is an easy-to-use, high-quality & pin-point accurate. The smooth matte surface finish makes this a popular choice for orthodontics, diagnostics, prototypes, aligners and implant models. This is the preferred resin choice by most dental labs due to its high-tensile strength once post-cured.
Showing all 2 results
PRECISE+ Dental Model Resin
$145.00 – $435.00
PRECISE Dental Model Resin
$145.00 – $435.00Diagnostic Models | Implant Models | Orthodontic Models | Clear Aligner Models | Crown & Bridge Prototypes
PRECISE™ HD SATISFACTION GUARANTEED
High accuracy
No shrinking or warping formulation.
Gypsum-like Texture
High opaqueness with a matte surface finish.
Hard surface
90+ Shore D after
post-curing.
Multi-compatible
A version to suit all DLP/MSLA 3D printers.
Why Choose Precise™ Dental Resin?
PRECISE™ Dental Resin was created with the assistance of leading dental industry professionals. The non-brittle formula was designed to print ultra-high-definition models. The gypsum-like matte texture, low-flexibility, and high-tensile strength formula makes PRECISE™ the optimal choice for 3D printing accurate 3D dental models.
The delicate balance between toughness, hardness and flexibility optimises it for all processes, including diagnostic, implant & orthodontic models and crown & bridge prototypes. Its low flex properties also make it suitable for vacuum-forming aligner models. Monocure 3D PRECISE™ Dental model resin is not approved for intraoral use.
Our quality control procedures follow the ISO 9001 guidelines to ensure batch-to-batch consistency in every bottle. We call this the set and forget methodology, meaning you only have to dial our resin once.
Then it’s as simple as pour and print, giving you more time to focus on what’s important. The unique low viscosity formula means lower print failures in colder weather, allowing consistent results all year round.
“I had been printing with the dental 3D resin that came with my 3D printer until I discovered Monocure 3D. Charlie asked if I wanted to try the PRECISE™ High Definition 3D printer resin. I was amazed at the ease of printing, low failure rate and accuracy of the models. I will use Monocure 3D as my go-to 3D printer resin from now on.”
Paul Tripodis
Dental Lab Technician, Melbourne
Which PRECISE™ formula Suits your 3D Printer?
PRECISE™ Dental Model Resin is available in two popular colours, Almond & Ortho White. Since DLP printers output more power than MSLA, we have a version to cover both system types.
Choose the DLP formula if your printer uses a projector module (DLP) to expose the layers. These include brands and models such as the MoonRay, SprintRay, Peopoly Moai, Asiga UV-Max & Pro 4K, Phrozen Make, B9 Creator, Flashforge Hunter, XYZ Nobel, and Kudo Titan.
If your 3D printer uses an LCD screen and a LED array (MSLA) to expose the layers, you must use our regular MSLA formula. These include Anycubic, Phrozen, Creality, Elegoo, Epax, Peopoly, Prusa, Uniz, Wanhao, WOW SparkMaker & Kelant. Please try the widget below to check the best resin for your 3D printer.
PRECISE™ 3D PRINTING PROTIPS
Ensure the material is mixed well before each time you print. This should be done by shaking the bottle or stirring the resin in the VAT before each print. Unused resin can be filtered and returned to the bottle.
Most 3D Printers & Resin materials are unique and require setting up before first-time use. We recommend that you dial-in new printers and resins using one of our handy calibration models.
Removing the excess resin is an important part of the resin printing process. This ensures that there is no trapped resin that can affect the detail of the model. IPA can be used, but for the best results and a safer alternative, we recommend our ResinAway® cleaning solution
After the washing process, post-curing any UV resin is vital. It helps remove any tackiness and completes the cross-linking process. This ensures the material is at its optimal mechanical properties as the final cross-linking occurs.
PRECISE™ DENTAL MODEL RESIN AT A GLANCE
PRECISE™ dental model resin is highly versatile and can be printed between 10 and 100-micron layer heights. To achieve the best results, 3D models should always be designed solid. If hollowing is required, ensure drain holes are included to remove any trapped resin.
When using PRECISE™ Dental 3D printer resin, always print large flat areas at an angle to help with print deformation due to the adhesion to the FEP film. To assist with unsupported areas, ensure you use well-positioned, solid supports.
We recommend you add a 2-second wait after the print setting to allow the material to cool after curing before starting to lift the build plate. (Not all slicers have this setting, check with your software provider).
Use a calibration model to dial in your printer with our resin. Check our printer settings page to see if we have your printer listed to give you a good starting point.
PRECISE™ MECHANICAL PROPERTIES
Method Code: ASTM D638-14
Product: Monocure 3D PRECISE™ Resin (50μm)
Acceptance Code: Supply Findings
Specimen Type: Retangular beam samples (Type IV)
Equip’ Serial No: UTM Serial No. 075
Conditioning: Tested at ambient temperature
SKUs
DPR-3982OW, DPS-3983OW,
DPR-3984AL, DPS-3985AL
Cross-Sectional Area (mm2)
26.47
Max Force (kN)
1.64
Tensile Strength (MPa)
64
Elongation at Break
3.0
Young’s Modulus (GPa)
1.8
Flexural Band Span (mm)
86.23
Max Load Applied (N)
380
Flexural Stress (MPa)
186
Max Flex Strain (mm/mm)
0.5
Shore Hardness (D)
92
Heat Deflection Temp
71°C @ 0.45MPa
3 STEPS TO A PERFECT FINISH
For best results after printing, use ResinAway® to remove uncured resin from the part. It cleans faster, better and lasts longer than IPA. It is non-flammable, doesn’t evaporate and has a pleasant scent. Follow the steps below to achieve the best finish for your 3D Printed dental models.
- Place the model into an ultrasonic cleaner with ResinAway® for 3-5mins to help remove the resin trapped in the finer detail.
- Ensure parts are dry by using compressed air or patting gently with a lint-free cloth before post-curing – Warning: leaving excess IPA or ResinAway® on parts might result in surface cracking.
- PRECISE™ resin requires post-curing to reach its optimal mechanical properties. We recommend using a 405nm LED Ultraviolet light to post-cure the model. It is recommended to post-cure for a few minutes, then remove the excess ResinAway® by washing with fresh water. Then place it back in the curing chamber for at least 30 mins to improve the tensile strength of the resin. This is important if you intend to use the model for Vacuum Forming.
PRECISE™ PHYSICAL PROPERTIES (MSLA)
SKUs
DPR-3984AL, DPR-3982OW
Colour(s)
Almond, Ortho White
Viscosity
300cps @ 25°C (BrookfieldRVT)
Odour
Negligible Characteristics
Shelf Life
36 months
Active Solids
100%
UV Cure
225nm to 420nm
Cure Speed
1.5-7 seconds per layer with UV 405um LED
Storage
Dark, cool & dry place
Wash Up
RESINAWAY® (or IPA)
Compatible MSLA Printers
- Anycubic
- Phrozen
- Creality
- Elegoo
- Epax
- Peopoly
- Prusa
- Uniz
- Wanhao
- WOW SparkMaker
- Kelant
- Not Listed – Contact Us
PHYSICAL PROPERTIES (DLP FORMULA)
SKUs
DPS-3985AL, DPS-3983OW
Colour(s)
Almond, Ortho White
Viscosity
300cps @ 25°C (BrookfieldRVT)
Odour
Negligible Characteristics
Shelf Life
36 months
Active Solids
100%
UV Cure
225nm to 420nm
Cure Speed
3-7 seconds per layer with UV 405um
Storage
Dark, cool & dry place
Wash Up
RESINAWAY® or (IPA)
Compatible DLP Printers
- Asiga
- SprintRay
- Peopoly
- MoonRay
- Phrozen Make
- B9 Creator
- Flashforge Hunter
- XYZ Nobel
- Kudo Titan
- Not Listed – Contact Us