NEW JUMBO SIZE!
Now Available in 100ml Bottle
“I can now make custom resin colours. The CMYK pigment set is 3D printing game-changer.”
Chris Bannaman
CC3D Print Service
Showing all 2 results
3D CMYK Pigment
$10.00 – $50.00
CYAN
MAGENTA
YELLOW
BLACK
APPLICATION & TIPS
Shake well before each use. Slowly drip the pigment solution into Monocure 3D resin and mix well until desired colour is reached.
For same colour density as pigmented Rapid resin, add approximately 4 grams (approx. 16drops) of the pigment dispersion into 100 grams of Resin.
Our pigments solutions are compatible with all of our Rapid Range Resin. Add to a white base to get a solid colour or to a clear base to get a transparent colour.
The more pigment you add, the more solid the colour will become. Warning: adding too much could result in curing and build plate adhesion issues.
CMYK COLOUR FORMULAS
Monocure 3D CMYK Pigment set is intended for use with Monocure 3D resin so custom colours can be created to suit individual needs. These pigment dispersions are designed to work with 3D printing applications where UV light is used to cure resin layer by layer. We use a simple but highly effective approach to anchoring dispersant onto pigments to significantly increase print performance. Our pigment dispersions do not effect performance across our resin systems, Increased stability is achieved by cross-linking of the dispesants to create a robust polymer shell, entrapping each pigment particle.
E05194
FF8D85
14AAF5
7ECC49
299438
B8B8B8
CCAC93
FAD000
B8255F
AF38EB
Trans Pink
* Preview colours are indicative only. 1 drop of pigment ~ 0.035 g
HOW TO HANDLE CMYK PIGMENTS
PPE
Wear gloves & protective clothes.
CLEANING
Clean spills with RESINAWAY or IPA.
STORAGE
Store the pigments in a dark cool place.
LEFTOVERS
Filter resin back into the bottle when not printing.
PHYSICAL PROPERTIES
Viscosity
600 cps @ 25C
Odour
Negligible
Active Solids
100%
Shelf Life
12 months
Shake well before each use.
Mix in small batches (100g).
Use scales for accuracy. Don’t over dose!
Works with all Monocure3D Resin.
MAKING YOUR OWN 3D COLOURS
SUBMIT YOUR COLOUR
If you have created a colour using our CMYK pigments, you would like to share it with the community. Please fill out the form by clicking the link below with as much detail as possible. Make sure your formulas are based on 100 grams of our Monocure 3D resin bases. Once we have checked the colour, we will share it on this page for others to use.