I have used M3D Tensile (Shark Grey) and an Uniformation GK2 for some time now to produce 19th century NSW HO scale railway carriages. It has proven to be excellent in producing fine detail and accurate sizes, just what is required for these models. I highly recommend this resin.

I have been buying disposable Nitrile gloves from hardware stores and supermarkets, to use when resin printing. I purchased these, as I was running low, and was placing a resin order, so decided to give them a go.

Price-wise, these are comparable, if not cheaper, than the previously-mention gloves.

They are also at least twice as thick, while retaining decent feeling through them - I was able to use my iPad, despite the increased thickness.

I frequently managed to tear my previous disposable gloves just when putting them on. No fear of that happening with these. Also, as they are so durable, I will likely get much more use out of a pair of these, than the thinner variety, so they are even greater value for money.

If you have been buying your disposable gloves from hardware stores, or supermarkets, stop now, and start buying these.

Once again, Monocure3D have created/ sourced a superior product, and are selling it at a remarkable price.

Excellent! Will always be using this.

This film works perfectly for my Anycubic Mono M7 printers. I can get two vat replacements out of one sheet which is a real bonus too. Sheets come with protective film on both sides which is easy to remove. Film is easy to work with and long-lasting.

Have trialled all the major brands of high temperature resins for moulding, have found this to outlast the others and the mould does not break down after multiple uses. Easy to print and great detail in the prints. Would highly recommend.

The film came in a decent size and its works fine in my Shinning Accu Fab cel

Good quality colors and easy enough to use.

Only suggestion is to use clear bottles with cor6esponding color labels so that it's easy to see how much pigment is left.

Tried it for the first time and very happy so far. I feel it works better than the Isopropyl Alcohol and the smell is less obtrusive.

We changed over from the tough resins when they were phased out and we aren't disappointed at all.

Our mixture has barely changed for our models, only difference is a slightly darker gray hue but once cured it becomes lighter.

Cost hasnt changed between the tough and the new impact resins

So we are "Impact"ed very little :D

Wish I had bought more. Really bring out the detail in the prints and far less chance of print failure than other brands. Would recommend everyone giving Monocure3d resins and cleaning products a go - you wont be disappointed!

Always keep stocked up with resin away as my print cleaning solution. Wash off excess resin in 'dirty' resinaway before giving a 15 minute wash in a clean wash station. Infinitely better than IPA.
My only gripe is as the clean mix gets older, it becomes increasingly more 'clingy' when blow-drying off. My council also doesn't accept chemical waste so I need to travel to dispose of fully saturated resinaway.

Best kit ever drop ur part in a bowl of this swish it twice then drop it in a bucket of water and all the uncured resin is gone. The best bit it last forever and when ur done with it put it in a takeaway container in the sun and it'll turn into jelly solidify then pop the lid on and straight into the bin. Nothing like having to deal with ipa

Not the first time I have bought it, its so good I keep buying more