Whale3 Super is being equipped with big light engine. Compare with Parallel light source, it has better UV uniformity on screen. It means you can get more accurate models.
Now printing with Whale3 Super you can use 0.25mm supports. Means your detail models won’t get too much damage on surface. And you can even take off these supports by fingers.

Learn More

Whale3 Super Specifications

Third-Party Materials: Yes
Layer height: 0.02 to 0.15 mm
Slicer Software: NovaMaker, CHITUBOX, LycheeSlicer, voxeldance tango Printing Speed: 13-55 mm/h
Technology: 10″3 8K Monochrome LCD
Lightsource: COB (wavelength 405nm) Build Volume: 228 × 128 × 260 mm
XY Resolution: 27.9 μm

Whale3 Super Settings

Try our UNICAL™ Calibration Model

If you’re trying Monocure 3D Resin for the first time or have just got a new printer, you’ll need to tweak your slicer settings to ensure perfect synergy between our resin and your printer. The most efficient way to achieve this is by using a Calibration Model. These small, intricate models are quick to print. To calibrate your printer using the UNICAL™ Download the STL model here and for step-by-step instructions on how to use the UNICAL™ head to our 3D Calibration Model Page.

Compatible Products