“The MoonRay 3D printer tries to close a gap between cheaper desktop FDM printers and more expensive SLA or DLP printers.

FDM printers are affordable but limited in quality. The prints where you can see each layer? They’re mostly FDM – these printers are not able to produce really flat, smooth surfaces.”

Read More

Printer Specifications

Printing Technology Mask Image Projection Stereolithography (SLA)
Print Volume 13 x 8 x 20 cm (Model S100), 9.6 x 6 x 20 cm (Model D75)
Layer Thickness Options 20 Microns, 50 Microns, 100 Microns
Print Speed 1 in/hour @ 100 Microns, 0.5 in/hour @ 50 Microns, 0.15 in/hour @ 20 Microns
Unit Dimensions 38 x 38 x 50 cm

Moonray Printer Settings

Try our UNICAL™ Calibration Model

If you’re trying Monocure 3D Resin for the first time or have just got a new printer, you’ll need to tweak your slicer settings to ensure perfect synergy between our resin and your printer. The most efficient way to achieve this is by using a Calibration Model. These small, intricate models are quick to print. To calibrate your printer using the UNICAL™ Download the STL model here and for step-by-step instructions on how to use the UNICAL™ head to our 3D Calibration Model Page.