“Initially, UNIZ released the successfully crowdfunded SLASH LCD-SLA 3D Printer at CES 2016. This year, the 3D printer manufacturer is equipped with an arsenal of new products.

The SLASH+ is essentially an upgrade over its predecessor, and is aimed at prosumers, hobbyists, educators, and artists. Using UDP technology, the printer is capable of 3D printing six full-arch dental models in less than five minutes.”

Read More

PRINT SETTINGS

Printer Specifications

Printing Technology LCD Stereolithography Printing Speed 1,000 cc/hr, 200 mm/hr thin-walls
Build Volume 192 × 120 × 200mm Dimension/ Weight 350 × 400 × 530mm [W×H×D]
XY Resolution 75µm Operating Temperature Suggested 18-28°C
Highest Accuracy* ±20µm Optical System 5500 (±300)Lux blue LED array
Layer Thickness 10, 25, 50, 100, 150, 200, 300µm Mechanical Carbon Fiber/Steel Reinforced
Separation Mechanism Polymer film natural peel

 

Slash Plus Printer Settings

Try our UNICAL™ Calibration Model

If you’re trying Monocure 3D Resin for the first time or have just got a new printer, you’ll need to tweak your slicer settings to ensure perfect synergy between our resin and your printer. The most efficient way to achieve this is by using a Calibration Model. These small, intricate models are quick to print. To calibrate your printer using the UNICAL™ Download the STL model here and for step-by-step instructions on how to use the UNICAL™ head to our 3D Calibration Model Page.