Whale3 Ultra is being equipped with big light engine. Compare with Parallel light source, it has better UV uniformity on screen. It means you can get more accurate models.
Now printing with Whale3 Ultra you can use 0.25mm supports. Means your detail models won’t get too much damage on surface. And you can even take off these supports by fingers.
Whale3 Ultra adopts a 10″3 inch 8K mono LCD screen with an HD resolution of 7680x4320px and an ultra-fine XY resolution of 29.7μm, outputting outstandingly detailed 3D models
Never worry about running out of resin when printing large models if you are with Whale3 Ultra auto-feeding system.
With a build volume of 228x128x260 mm³/ 8.97×5.03×10.23 in³ and a 10.3” large mono LCD screen make the prototype size larger and the curing efficiency higher, you can print one larger model or multiple smaller models in a single batch.

Learn More

Whale3 Ultra Specifications

Third-Party Materials: Yes
Layer height: 0.02mm～0.15 mm
Slicer Software: NovaMaker, CHITUBOX, LycheeSlicer, voxeldance tango Printing Speed: 13-55 mm/h
Technology: 10″3 8K Monochrome LCD
Lightsource: COB (wavelength 405nm) Build Volume: 228*128*260mm/8.97 x 5.03 x 10.23 in³
XY Resolution: 27.9μm

Whale3 Ultra Settings

Try our UNICAL™ Calibration Model

If you’re trying Monocure 3D Resin for the first time or have just got a new printer, you’ll need to tweak your slicer settings to ensure perfect synergy between our resin and your printer. The most efficient way to achieve this is by using a Calibration Model. These small, intricate models are quick to print. To calibrate your printer using the UNICAL™ Download the STL model here and for step-by-step instructions on how to use the UNICAL™ head to our 3D Calibration Model Page.